ASME SA335 P11 أنابيب فولاذية سبيكة سلس

ASME SA335 P11 أنابيب فولاذية سبيكة سلس, ASME SA335 P11 the standard applicable to seamless Ferritic Alloy-Steel Boiler, المحماة, and Heat-Exchanger tubes.

ASME SA335 P11 أنابيب فولاذية سبيكة سلس, ASME SA335 P11 Seamless Pipes

ASME SA335 P11 Seamless Pipesshall be made by the seamless process and shall be either hot-finished or cold drawn with the finishing treatment.

ASME SA335 P11 Seamless Pipescovers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, الخصائص الميكانيكية, and high-temperature characteristics.

تفاصيل المنتج

Click to download the details of Standard

معيار: ASTM A 335, ASME SA 335 ص11

مقاس: 1/8NB TO 24NB IN

سمك الجدار: SCH20; SCH40; SCH80; SCH120; SCH160

شكل: دائري

طول: طول عشوائي واحد/ طول عشوائي مزدوج أو كطلب عميل فعلي

درجة: ص11

ASME SA335 P11 Chemical Composition:

ASME SA335 P11 Heat Treatment Requirements

ASME SA335 P11 Tensile Requirements and Hardness:

• اختبار تسطيح- يجب إجراء اختبار تسطيح واحد على عينات من كل نهاية أنبوب واحد نهائي, ليس الشخص المستخدم لاختبار الإشعال, من كل قطعة.
• اختبار اشتعال- يجب إجراء اختبار اشتعال على عينات من كل نهاية أنبوب منتهية, ليس الشخص المستخدم لاختبار التسطيح, من كل قطعة.
• اختبار كهربائي الهيدروستاتيكي أو غير المدمر—Each tube shall be subjected to the nondestructive electric test or the hydrostatic test. The type of test to be used shall be at the option of the manufacturer, unless otherwise specified in the purchase order.

ASME SA335 P11 Seamless pipes Inspection photos:

ASME SA335 P11 Materials and Manufacture:

• ASME SA335 P11 Seamless alloy-steel pipes shall be made by the seamless process and shall be either hot-finished or cold finished, as specified.
• Heat Treatment—Ferritic Alloy and Ferritic Stainless Steels—The ferritic alloy and ferritic stainless steels shall be reheated for heat treatment in accordance with the requirements of Standard. Heat treatment shall be carried out separately and in addition to heating for hot forming.

ملحوظة:

• All tubes shall be supplied as per applicable ASTM A335 /A335M Specification.
• Mill test certificates will be issued according to EN10204.3

ASME SA335 P11 أنابيب فولاذية سبيكة سلس

ASME SA335 P11 Seamless Pipes Packing and Marking

• Packed in bundles or ply wooden box wrapped in plastic, and suitably protected for sea-worthily delivery or as requested.
• ASME SA335 P11 Seamless pipe marking required by Specification A 999/A999M, the marking shall include the length, an additional symbol “ق” if the pipe meets any of the supple mantuary requirements S1 to S6, the schedule number if the pipe is ordered to a schedule number, and the heat number or manufacturer’s number by which the heat can be identified. فضلاً عن ذلك, the marking specified in the standard to indicate the test method(ق) shall be included. Marking may be by stenciling, stamping or rolling. Pipe that has been weld repaired in accordance with 7.6 shall be marked “WR”.

ج&N Hongcheng هي الشركة المصنعة للأنابيب والمورد من الصين, لدينا أنابيب فولاذية سلسة ASME SA213/213M, لو سمحت اتصل بنا for more product information.

ASME SA335 P11 أنابيب فولاذية سبيكة سلس