C&N
Contact Us

News released

sales@cnpipefitting.com
Visit this page periodically to find news on our business and industry! the news item was under construction,If you have an interesting News Story that you would like to have submitted on our site? Please email it to us at sales@cnpipefitting.com

23-7-2018

Description 20FF 40FF 40FF pipe fitting loading

 

Flatracks consist of a floor structure with a high loading capacity composed of a steel frame and a softwood floor and two end walls, which may either be fixed or collapsible. The end walls are stable enough to allow cargo securing means to be attached and several flatracks to be stacked on top of one another. Flatracks are available in 20' and 40' sizes.

A number of lashing rings, to which the cargo may be secured, are installed in the side rails, the corner posts and the floor. The lashing rings may take loads of up to 2000 kg in the case of 20' flatracks or up to 4000 kg in the case of 40' flatracks.

Some types of 20' flatracks have forklift pockets.

40' flatracks have gooseneck tunnels at each end. In addition, they are sometimes equipped with lashing winches with 2 metric ton lashing belts.

For transport of certain cargoes, flatracks may be provided with stanchions. C&N have loaed 3048X7000X4000 steel pipe fitting API 5L X65 elbow on 40FR container
on July 2018. this is for water supply system in UAE, below are calulation and loading pictures for the flat rack container loading.

20FF x65 fitting loading
40FF pipe fitting loading
Big sizes pipe fitting
96 inch elbow

 

C&N range: | elbows | tee | cross | reducers | bend | caps | coupling | plug | nipple | olet | clamps | Thread fittings | | Butted weld fittings | socket fittings | | Flanges : slip on | weld neck WN | orifice | blind | thread | socket weld | SAE | reducing | Ring Joint Flanges | |Seamless steel pipe | weld steel pipe Limited will particpate.